Thin jack is a split hydraulic jack with a smaller volume and can generate greater working capacity. It is especially used in places with narrow space. It has the functions of being lightweight, flexible, and having a large jacking force. This product is widely applicable to enterprises such as electric power, chemical industry, steel, bridges, and machinery.

Thin jack lifting capacity: 5T - 150T. Lifting height: 6 - 64mm. Maximum working pressure: 70MPa. Then what are the specifications and parameters of the thin jack? What are its characteristics? Now, the editor will take you to understand.

Introduction to Thin Jack

I. Introduction

The thin jack is a split hydraulic jack with a smaller volume and can generate greater working capacity. It is especially used in places with narrow space. It has the functions of being lightweight, flexible, and having a large jacking force. This product is widely used in power, chemical, steel, bridges, machinery and other enterprises and exerts its infinite power. Thin jack lifting capacity: 5T - 150T. Lifting height: 6 - 64mm. Maximum working pressure: 70MPa.

II. Working Principle

The principle on which the thin jack works is Pascal's principle. That is, the pressure of the jack liquid everywhere is the same. In this way, in a balanced system, a smaller pressure is applied on the smaller piston, and a larger pressure is applied on the larger piston. In this way, the liquid can be kept still. Therefore, through the transmission of liquid, different pressures can be obtained at different ends, so that a transformation purpose can be achieved, thereby achieving the function of lifting and jacking up.

III. Characteristics

1. Compact and flat design for occasions where other hydraulic cylinders are not applicable;

2. RSM-750, -1000, -1500 are equipped with a handle for easy carrying;

3. Mounting holes make fixation easy; The painted surface makes the corrosion resistance stronger;

4. All models are equipped with quick connectors and dust caps;

5. Chromium-plated plunger;

6. The grooved plunger surface does not need a saddle; single acting, spring retraction.

Uses of Thin Jack

The JRS series jacks have a smaller volume and can generate greater working capacity. They are especially used in places with narrow space and have the functions of being lightweight, flexible, and having a large jacking force. This product is widely used in power, chemical, steel, bridges, machinery and other enterprises and exerts its infinite power.

1. If the oil volume of the pump body is insufficient, working oil (10# engine oil) must be added to the pump before it can work.

2. Estimate the lifting weight and avoid overloading.

3. Determine the center of gravity of the lifted object and select the force application point of the jack. At the same time, it must be considered whether a tough wood is padded on the soft and hard ground to avoid the danger of tipping during lifting.

4. After the jack lifts the heavy object, the heavy object should be supported firmly with tough wood in time. The jack is prohibited from being used as a support, and multiple jacks are prohibited from being used simultaneously to avoid the danger of tipping due to unbalanced load.

5. When in use, first connect the quick connector of the manual pump to the jack, then select a good position, and tighten the oil drain screw on the oil pump to start working. Loosen the oil drain screw to unload the cylinder.